The Ultimate Guide to Resetting Your LIFX Bulb: Step-by-Step Instructions for a Fresh Start

Table of Contents

How to Reset LIFX Bulb: A Step-by-Step Guideline

In a growing era of smart home technology, LIFX bulbs stand as convenient game-changers, illuminating living spaces while being manageable remotely. However, like any technology, there are occasions when a bulb might require a reset. In this guide, we will walk you through the steps to **how to reset LIFX bulb** for different models, before which, we discuss the essence of the LIFX bulb itself and the possible reasons for a reset.


A Brief Overview of the LIFX Bulb

LIFX bulbs are WI-FI enabled, multi-colour smart bulbs that can be controlled with a smartphone, tablet, smartwatch or Alexa devices. They offer a full spectrum of colors and white shades without needing a hub or extra hardware.

Reasons Why You Might Need to Reset a LIFX Bulb

Numerous reasons could necessitate the resetting of a LIFX bulb. They range from Wi-Fi network changes, software glitches, to the transfer of bulb ownership or troubleshooting of unresponsive bulbs.

Before You Start

Identifying Your LIFX Bulb Model

Your bulb model will determine the reset procedure, so it’s essential to identify it first. Three product categories come under LIFX: standard bulbs, downlights, and light strips and beams.

The Importance of Safety Precautions During the Process

During a reset, always ensure the bulb is cool for safe handling. Additionally, be careful to avoid any shocks while handling the bulb, especially if wet conditions prevail.

Necessary Items or Tools Needed for Resetting

The primary tool you’ll need for resetting your LIFX bulb is simply the switch its connected to. In cases of strip and beam models, the LIFX app will also play a crucial role.

Steps to Reset a Standard LIFX Bulb

Manual Switch Procedure and Timing Considerations

Switch the LIFX bulb off and on at the switch five times, leaving it in the ‘on’ position at the end. Wait between each toggle for around a second.

Disconnection from the Power Source and Reconnection Process

Post the toggling activity, the bulb will be disconnected and begin a ‘cool-down’ process. Once it starts to change color (red, green, blue, and back to white), you can reconnect it.

Monitoring the Color Change for Successful Reset

The color resetting process indicates the restoration of factory settings. If the bulb responds with a color cycle, the reset has been successful.

Steps to Reset a LIFX Downlight

Differences Between Resetting a Standard LIFX Bulb and LIFX Downlight

Contrary to the standard bulb, reseting LIFX Downlight involves toggling the power switch off and on at the switch _ten_ times, pausing for 1 second intervals.

How to Reset a LIFX Strip and LIFX Beam

Description of the Reset Procedure Specific to These Models

These models require a different approach. In the LIFX app, locate and select the specific strip or beam, go to ‘settings’ and then ‘reset’. Confirm your instruction, and the device should reset.

How to Reconnect the Reset Bulb to Your WiFi Network

If all steps have been followed correctly, you should be able to reconnect the bulb to your network via the LIFX application.

Troubleshooting Common Issues During Bulb Reset

Addressing Inability to Reset

If the resetting process fails, ensure you have followed the right steps for your specific LIFX model. If the problem persists, contact LIFX Customer Service.

Bulb Not Changing Color During Reset Process

If the color change is not observed, try repeating the reset process. If unsuccessful, it may indicate a larger issue that requires professional assistance.

Bulb Fails to Reconnect to the Network After Reset

If the bulb refuses to reconnect after reset, double-check your WiFi settings. Some models don’t support 5GHz frequency bands.

How to Contact LIFX Customer Service

Contact Details for Further Assistance

LIFX Customer Service can offer further assistance and can be contacted via email, phone, or live chat on their official website.

Information to Prepare Before Contacting Customer Service

When reaching out to Customer Service, note your bulb’s model, the actions you’ve taken, and the results observed for a faster resolution.


Resetting a LIFX bulb involves a series of simple steps that differ based on the model. Always remember that following the correct steps for your bulb model is crucial for a successful reset.

Frequently Asked Questions

We will address common queries regarding the reset process of LIFX bulbs in our FAQ section. Following these steps for how to reset LIFX bulb will ensure a smooth, efficient reset process enabling you to get back to enjoying your smart lighting quickly.